Cookie Img
Back to top
Send SMS Send Inquiry
Home » Products » Powder Coating Paint » Marpol Powder Coatings

Marpol Powder Coatings

Marpol Powder Coatings
Marpol Powder Coatings
Product Code : 04
Product Description

Marpol Powder Coatings are the finish of choice in industries ranging from heavy equipment to electronics and from outdoor recreational products to appliances. These powder coatings include a solvent-free workplace, lower overall line costs and ease of cleanup. Powder coatings can also help finishers with their sustainability efforts, as these have zero to very low VOCs and offer overspray recycling capabilities and product waste that can generally be disposed of in conventional landfills. The Marpol Powder Coatings are available in a range of chemistries, finishes and gloss levels, for interior or exterior application.



  • No hazardous waste
  • One coat application
  • Environment friendly

Basics of Powder Coating

  1. Keep the powder in packed condition and in a clean dry and cool place.

  2. Use moisture and oil free air for coating, reclaiming and cleaning.

  3. Keep the gun voltage < 100 KV for regular powders and < 60 KV for metallic powders.

  4. Sieve all reclaimed powder through 125 No. mesh and use the powder along with virgin powder.

  5. Recommended powder mixing ratio of virgin to reclaim is around 80:20. Metallic powders are now recommended for recycling as there could be shade / finish variance.

  6. Check article grounding before coating. Improper grounding will result in powder not adhering to component and powder loss.

  7. Keep seperate hoses for plain finishes and structures to prevent contamination of additives in plain finishes.

  8. Keep the gun tip from component being coated at a distance of 8 to 12 inches to get maximum transfer efficiency which helps achieve better coverage.

  9. Ensure regular and preventive maintenance practices as recommended by pre-treatment and equipment suppliers along with good housekeeping practices to achieve quality in powder coating.

  10. Reduce voltage and powder output while coating edges and areas of powerful back ionisation.


Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.